Clay bar, hard RKR

KOC183002
Removes even stubborn deposits such as tree resin and insects, rust bloom, industrial dust, spray mist, tar, limescale stains, etc.
42,52 €
AR PVN
Daudzums

Apraksts
Cleaning clay, abrasive Removes even stubborn deposits such as tree resin and insects, rust bloom, industrial dust, spray mist, tar, limescale stains, etc. gently from smooth surfaces such as heavily weathered / dirty paintwork and glass. Optimal for intensive cleaning before the polishing process or before fitting new windscreen wipers. Not recommended for new paintwork because subsequent polishing is necessary. 1. Clean/wash surfaces thoroughly beforehand with necessary products; 2. Shape the cleaning clay into a palm-sized piece; 3. Spray Clay Spray onto the surface; 4. Move the cleaning clay over the surface without pressure until it is smooth and clean; 5. Knd the dirt on the cleaning clay to the inside until the surface is clean again; 6. Cleaning clay can be used until it is almost saturated through with dirt particles; 7. To prevent drying out, moisten the cleaning clay after use and store in the box; 8. Finish off treated paintwork with Power Cut or Feinschleifpaste and where necessary with Hochglanz-Antihologramm-Politur; 9. Seal with Lack-Polish grün, 1K-Nano or similar.
Produkta detaļas
KOCH CHEMIE
KOC183002
16 produktu tajā pat kategorijā:
Micro Cut 76x23mm Īss ieskats

Norāde: KOC999583

Zīmols: KOCH CHEMIE

Micro Cut 76x23mm

High-quality special sponge for removing fine scratches, holograms and polishing marks using the Micro Cut M3.02 and Micro Cut and Finish P3.01.

Cena 9,10 €
Vairāk
Pieejamās vispirms
Micro Cut M3.02 1L Īss ieskats

Norāde: KOC403001-1

Zīmols: KOCH CHEMIE

Micro Cut M3.02 1L

Micro Cut M3.02 is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant).

Cena 58,80 €
Vairāk
Pieejamās vispirms