EPCBC03 BATTERY CHARGER 12/24V 15A WITH REPAIR FUNCTION AND 8-STAGE CHARGING PROCESS

An advanced charging function rectifier from EINPARTS. Powered by 230V AC voltage, it offers an output voltage of 12/24V, providing versatile charging. The rectifier is ideal for charging batteries for cars with START / STOP engines. Technical data: Power supply: 230V AC Output Voltage: 12/24V Output Current: Max 15A Maximum load power: 130W Power without load: 3.2W Cooling System: Fan Dimensions: 17.5x13.5x7.5cm. Voltage identification for 12V: 8V - 14.5V Voltage identification for 24V: 18V - 29V Output cable length: 120 cm Input cable length: 140 cm 8 STAGES OF CHARGING: Phase 1: Battery Assessment - Examining the battery's charge state and verifying the correctness of the connections to the rectifier. Phase 2: Desulfation - Identifying a battery with sulfate deposits. Low-voltage, high-current pulsating charging allows for the removal of sulfate from electrodes, restoring the original battery capacity. Phase 3: State Check - Checking whether the battery is not damaged and whether it is capable of accepting a charging current. This prevents charging a damaged battery. Phase 4: Soft Start - Begins charging an undamaged battery with low current (about 15%), gradually increasing its value. Phase 5: Main Charging - Charging the battery with maximum constant current, automatically adjusted depending on the charge state, until 80% capacity is reached. Phase 6: Final Charging - Charging with decreasing current and constant voltage until the battery is fully charged (100%). Phase 7: Charging Test - About a two-minute test to check if the battery charge level is maintained after charging has ended. If so, the charging process is completed. Phase 8: Voltage Maintenance - Monitoring the battery voltage and maintaining an optimal charge at the 95-100% capacity level using current pulses.